|
CSC-1 Digital Classical Shock Controller Specifications
CONTROL CHARACTERISTICS
WAVEFORMS: Half-sine, triangle, trapezoidal, terminal or initial peak sawtooth, quarter-sine
PULSE DURATION: 1 to 100 milliseconds
PULSE LEVEL: 0.5 to 200 Gs peak
CONTROL ACCURACY: +/- 1 dB typical
MODE: Single or repetitive pulses
EQUALIZATION TIME: < 5 seconds for low level equalization of transfer function
SAMPLING FREQUENCY: 1.28 KHz, 2.56 KHz, 5.12 KHz, and 10.24 KHz
UNITS: English or metric
SIGNAL INPUTS
INPUT CHANNEL: One control
INPUT SENSITIVITY: Software settable from 8 to 1000 mV/G
CURRENT SOURCE: 4 mAmp, 18VDC compliance
SIGNAL OUTPUT
OUTPUT SIGNAL: Filtered analog drive waveform
DRIVE LEVEL: 16 V Peak-Peak maximum
DRIVE LIMITING: User settable from 0 to 16 VP-P
DYNAMIC RANGE > 60dB
DISPLAY MONITOR
GRAPH: Acceleration, velocity, displacement and shock response spectrum (SRS)
ACCELERATION: Gs Peak
VELOCITY: Inches/Sec Peak
DISPLACEMENT: Mils Peak-Peak
TIME: Time, date, test run time
UNITS: English or metric
TEST ARTICLE PROTECTION
ABORT LIMIT: Programmable 1 to 99 dB
SYSTEM LIMITS: Programmable for D, V, and A
CONTROL: Open loop and low gain detectors
MANUAL ABORT: From keyboard or mouse
TEST DOCUMENTATION
Complete test reports can be stored to disk or printed out in color or black & white on any Windows compatible printer .
SYSTEM REQUIREMENTS
COMPUTER: 486DX33 or better with VGA display, 8 mb RAM, and Windows
POWER: <10 watts from computer bus.
SIZE: Standard AT 3/4 size PC card (11" x 4.5")
Specifications are subject to change without notice
|
